Oxy-Bond 11 Special

• Easy mixing ratio 1:1 by weight or volume
• Thixotropic, ideal for vertical and overhead applications
• Ideal for repairing corners and edges
• Gap, joint and crack filling
• No shrinkage
• Impermeable to liquids
• Excellent adhesion even on damp surfaces
• High impact resistance and mechanical strength      
• Good colour for easier colour matching

Mortar and concrete should ideally be older than 28 days, but may depend on the users minimal requirement of strength.  The substrate should be clean, dry and free of dirt, oil, grease or surface treatments and coatings.  Remove all loose friable material to achieve a textured surface.

Mix the base and hardener 1:1 by volume or weight respectively with a folding action to minimise air entrapment.  Ensure a uniform colour is achieved before application.  Apply the mixed adhesive to the prepared surface using a spatula or trowel.  When applied to moist or wet surfaces work the adhesive well into the substrate surface.  Ensure components are fully supported during curing to prevent any slippage.  Clean all tools immediately after use with thinners as cured material can only be removed mechanically.

Download the technical data sheet here.